Online Chat

Fusion Splicer Fujikura FSM 70S

Fusion Splicer Fujikura FSM 70S
Harga Rp 0
Persediaan Ada
Kode FSM 70S
Merk Fujikura

Jumlah Add to Cart

The Fujikura 70S+ is the world’s fastest and most robust core alignment fusion splicer. Incorporating the proven ruggedized features pioneered by Fujikura, the 70S+ has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 13-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirror-less optical system and "severe-impact resistant" monitor. Battery capacity is now 200 splices/shrinks.

An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before. In an industry first, the 70S+ is also equipped with Bluetooth® technology. This allows the splicer to actively communicate with Bluetooth enabled fiber preparation accessories making maintenance of fiber preparation tools easier than ever! The 70S+ will also be available without Bluetooth functionality.


Features Splicer Fujikura FSM 70S

  • Automated and programmable wind protector
  • 9-second automated tube heater
  • Fully robust for shock, dust and moisture
  • Li-Ion battery with 200 splices/shrinks per charge
  • 5 mm cleave length for splice on connector or small package needs
  • Sheath clamp or fibre holder operation
  • On-board training and support videos
  • Internet software upgrades
  • Multi-function transit case with integrated workstation




FSM-70S Fusion Splicer

Applicable Fibers

Single-mode (ITU-T G.652 & G.657), Multimode (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)

Cladding Diameter


Coating Diameter

100μm to 1,000μm

Fiber Cleave Length

5mm to 16mm

Typical Average Splice Loss

0.05dB with SM, 0.02dB with M , 0.08dB with DS, 0.08dB with NZDS


Measured by cut-back method relevant to ITU-T and IEC standards

Splicing Time

SM Fast Mode - 7 seconds; SM Auto Mode - 12 seconds; Auto Mode - 15 seconds

Arc Calibration Method

Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available

Splicing Modes

100 preset and user programmable modes

Splice Loss Estimate

Based upon dual camera core alignment data

Storage of Splice Result

Last 2,000 results to be stored in the internal memory

Fiber Display

X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation


320X for single X or Y view, or 200X for X and Y view

Viewing Method

Dual cameras with 4.7 inch TFT color LCD monitor

Operating Condition

0 to 3,660m above sea level, 0 to 95%RH and -10 to 50°C respectively

Mechanical Proof Test

1.96 to 2.25N

Tube Heater

Built-in tube heater with 30 heating modes; auto-start function

Tube Heating Time

Typical 14 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves

Protection Sleeve Length

60mm, 40mm, micro

Splice/Heat Cycles with Battery

Typical 200 cycles with power save functions activated

Power Supply

Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-18, 14.8V DC with BTR-09 battery


USB 1.1 (USB-B type) for PC communication. M ini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater

Wind Protection

Maximum wind velocity of 15m/s. (34 mph)


146 W x 159 D x 150 H (mm) / 5.75" W x 6.25" D x 5.9" H


2.3 kg (5.5 lbs) with AC adapter ADC-18; 2.5kg (5.95 lbs) with BTR-09 Li-Ion battery


Silahkan Tulis Review Anda:
Nama Anda

Review Anda Catatan: Kode HTML Tidak Diperbolehkan!

Rating Kurang Bagus            Sangat Bagus

Masukkan kode di dalam kotak di bawah ini